Poly Films and Laminates Testing Instruments

Product Details:

Vacuum Leak Tester Digital is a device used to test the integrity of seals on packages or products by creating a vacuum and measuring any changes in pressure. It is commonly used in the food and beverage, pharmaceutical, and medical device industries to ensure that products are properly sealed and protected from contamination or leakage.
The digital vacuum leak tester works by placing the package or product in a chamber, which is then sealed and evacuated to create a vacuum. The tester then measures any changes in pressure over time to detect any leaks in the package or product.
Digital vacuum leak testers offer several advantages over traditional analog testers. They are more accurate and reliable, with digital displays that provide precise measurements of pressure changes. They are also easier to use, with programmable settings that allow for consistent and repeatable testing.
Digital vacuum leak testers are available in different sizes and capacities to accommodate a variety of package and product sizes. They can be used for testing a wide range of products, including bags, pouches, containers, and even electronic components.

• Microprocessor based Fully Automatic Instrument
• Vacuum Range: 150 - 600 mm- Hg
• Desiccator: 12” (300mm Diameter) 
• Display: Alphanumeric LCD with Backlit
• Keyboard: Soft Touch Membrane Keys
• USB Port: For Dot Matrix Printer with parallel interface
• Vacuum Pressure Gauge: Digital
• Vacuum and Hold time: Programmable
• Hold Time: Upto 999 Seconds
• Automatic Last result storage
• Construction of cabinet: Stainless Steel
• Power: 230V AC, 50 Hz
• Weight: 13 Kg (Approx.)

Product Details:

Coefficient of Friction Tester is a device used to measure the static and kinetic friction of materials. The tester is designed to determine the amount of force required to move one surface over another surface. This information is useful for evaluating the slipperiness of materials and for ensuring the safety of products that come into contact with other surfaces.
The tester works by applying a controlled force to a sample of material and measuring the force required to move it across another surface. The force is gradually increased until the sample starts to move, at which point the device records the force required to initiate movement (static friction) and the force required to keep the sample moving at a constant speed (kinetic friction).
The digital version of the Coefficient of Friction Tester provides more precise and accurate measurements compared to analog models. It displays the test results in real-time on a digital screen, making it easier for operators to read and interpret the data. It also has the capability to store and analyze test data, making it easier to track trends and identify potential issues.

Product Details:

A peel bond/seal/adhesion strength tester is a device used to measure the strength of the bond between two materials. It is commonly used in the packaging industry to test the adhesion strength of packaging materials such as tapes, labels, and coatings.
The tester works by applying a force perpendicular to the surface of the material being tested, which pulls the material away from the surface to which it is bonded. The force required to separate the two materials is measured and used to determine the strength of the bond.
Peel bond/seal/adhesion strength testers come in a variety of configurations, including manual and automated models. They may also be designed to measure the strength of the bond at different angles or under different conditions, such as wet or dry environments.

Specification:-

• Table Top model 
• Aesthetic outer appearance 
• Unique and compact design features 
• Fitted with Microprocessor based Programmable Logical controller 
• Equipped with Lead screw for friction less traverse 
• Reputed make Induction motor with Dedicated Gear Box and Drive for speed variation and to maintain speed at high
• Easy to use display unit (controller part) 
• In built Over Load Safety
• In built Over Travel Safety 

Product Details:

The Falling Dart Impact Tester is a device used to determine the impact resistance of plastic films and sheets. The test involves dropping a weighted dart from a specified height onto a sample of the plastic film or sheet, and measuring the energy required to cause the material to fail.
The Falling Dart Impact Tester consists of a frame that supports a swinging arm, which holds the dart. The sample is clamped in place beneath the arm, and the dart is released to fall onto the sample. The energy required to cause the failure of the sample is calculated by measuring the height from which the dart was dropped and the depth of the indentation created by the impact.

Product Details:

A computerized peel bond/seal/adhesion strength tester is a device used to measure the force required to peel a bonded material or seal apart. This type of tester is commonly used in industries such as packaging, automotive, and construction to ensure that materials are properly bonded and sealed.
The tester typically consists of a base unit, a clamping mechanism to hold the materials being tested in place, and a mechanism to apply force to the materials to initiate the peel. The force required to peel the materials apart is measured and recorded by a computerized system, which provides greater accuracy and consistency compared to manual testing methods.
Computerized peel bond/seal/adhesion strength testers are capable of testing a wide range of materials, including tapes, films, foils, adhesives, coatings, and laminates. They can also be used to test the strength of welded or sealed seams in materials such as plastics and rubber.

Product Details:

A laboratory heat sealer is a device used to seal flexible packaging materials such as plastic films, laminates, and foils. The sealer uses heat and pressure to create a strong and airtight seal, which is important for maintaining the freshness and quality of the packaged product.
The laboratory heat sealer consists of a heated element, a pressure bar, and a control unit. The heated element is used to melt the packaging material, while the pressure bar applies pressure to create a seal. The control unit regulates the temperature and pressure to ensure consistent and repeatable seals.
The laboratory heat sealer is commonly used in research and development, quality control, and production environments to test and evaluate the sealing properties of flexible packaging materials. It can be used to determine the optimum temperature and pressure settings for a particular material, as well as to test the strength and integrity of seals under different conditions such as temperature, humidity, and pressure.