Plastic and Polymer Testing Instruments

Product Details:

Melt Flow Index Tester is a device used to measure the flow rate of molten thermoplastic materials, such as polyethylene and polypropylene. The digital mode of a melt flow index tester refers to the use of digital technology to automate the testing process and provide more accurate and reliable results.

A digital melt flow index tester typically consists of a heated cylinder, a piston with a specified weight, and a digital display. The molten plastic material is loaded into the cylinder, and the piston is pushed down onto the material with a specified force. The time it takes for the piston to travel a specified distance is measured, and the melt flow rate is calculated based on this measurement.

The digital mode of a melt flow index tester automates the measurement and calculation process, providing more precise and repeatable results than manual testing methods. Digital melt flow index testers also typically feature a user-friendly interface for easier operation and data collection.
Specification

• Temperature Controller: Microprocessor based Digital Temperature Controller
• Temperature Range: Upto 400 deg. C
• Resolution: 0.1 deg. C
• Accuracy: +/- 0.1 % F.S.D. 
• Timer: Microprocessor based Digital Timer with range up to 999.9 Seconds and having Preset facility and buzzer output. 
• Weights: 2.16 Kg & 5 Kg hard chrome plated weights. 
• Accessories: Orifice, Piston, Barrel Cleaner, Orifice cleaner etc.
• Sample Cutting: Auto-Cut
• Paint: Powder Coating. 
• Power: 230V AC, 50 Hz 
• Amperes: 4 Amps. 
• Table Top Model

Product Details:

A Humidity Chamber, also known as a conditioning chamber, is a type of environmental test chamber used to simulate and control humidity levels and temperature conditions for testing materials and products.
In a humidity chamber, the humidity and temperature levels can be precisely controlled to create different environmental conditions, such as high humidity or extreme temperature variations. The chamber can also simulate various climate conditions, such as tropical or desert environments, to test the performance and durability of products under different conditions.
Humidity chambers are commonly used in industries such as automotive, aerospace, and electronics, where materials and products may be exposed to humidity and extreme temperatures in their applications. The testing helps manufacturers to evaluate the quality and reliability of their products and identify potential issues before they reach the market.
Contact Pacorr Testing Instruments Pvt. Ltd. for more information

Product Details:

An ultra-low deep freezer is a specialized freezer unit designed to store products and materials at extremely low temperatures, typically between -80°C and -120°C. The freezer is designed to maintain a consistent low temperature to prevent samples from degrading, preserving their quality and viability for future use. Ultra-low deep freezers are used in a variety of applications, including medical and research laboratories, biotechnology and pharmaceutical industries, and food processing and storage facilities. They are essential for storing temperature-sensitive materials such as vaccines, blood samples, and genetic materials.

Product Details:

An Ozone Test Chamber is a type of environmental test chamber designed to simulate the effects of ozone exposure on materials and products. Ozone is a highly reactive gas that can cause damage to many materials, such as rubber, plastics, and coatings, as well as affect the performance of electronics.
In an ozone test chamber, samples or products are exposed to a controlled concentration of ozone and specific environmental conditions, such as temperature and humidity. The exposure time and concentration of ozone can be varied depending on the intended application and the material being tested. The samples are then evaluated for changes in physical properties, such as cracking, discoloration, and loss of strength.
Ozone test chambers are commonly used in industries such as automotive, aerospace, and electronics, where materials and products may be exposed to ozone in their applications. The results of the testing help manufacturers to identify potential issues and make improvements to their products, ensuring their reliability and durability in harsh environments.
Contact Pacorr Testing Instruments Pvt. Ltd. for more information

Product Details:

The Environmental Stress Cracking Resistance (ESCR) Tester is a device used to evaluate the resistance of plastic materials to environmental stress cracking. Environmental stress cracking occurs when a plastic material is exposed to a combination of tensile stress and a specific environment, such as a chemical or liquid. This can lead to cracking or failure of the material over time.
The ESCR tester simulates this condition by applying a constant tensile stress to a sample of the plastic material while it is immersed in a specific test environment. The sample is usually a thin film or sheet of the material, and the environment is typically a liquid or chemical that is known to cause stress cracking in the material.

Product Details:

The Izod and Charpy impact testers are devices used to measure the impact resistance of materials, particularly plastics and metals. The Izod and Charpy tests are two of the most common methods used to determine the impact strength of materials.
The Izod test involves placing a notched sample of the material onto a horizontal support, and then striking the sample with a pendulum. The energy required to break the sample is measured, and this value is used to calculate the Izod impact strength.
The Charpy test is similar to the Izod test, but involves placing a notched sample in a vertical position and striking it with a pendulum. The energy required to break the sample is again measured, and this value is used to calculate the Charpy impact strength.
Both the Izod and Charpy tests are commonly used in the manufacturing industry to determine the impact resistance of materials used in various applications, such as automotive parts, structural components, and packaging materials.

Specification

• Impact Energy :0-25 Joules
• Release angle of pendulum: 150 Degree
• Micro controller: With setting of sample dimension, error of machine and selection of Standard of test process (IS, ISO or ASTM) and hammer selection with Direct display of impact energy in joules and Impact Strength in J/mt & J/mt² and corresponding angle in degrees on digital indicator with selection of hammer.
• 4 Line LCD display with 10 test memory with Average result of selected test.
• Indication to select low or high value of Hammer during test.
• Indication to conduct test by microcontroller.
• Faulty sensor indication on LCD display.
• Easy, Safe and maintenance free release mechanism for Hammers.
• Easy interchangeability of hammers during test.
• Hammers: 2 nos. of Powder coated hammers of one each for Charpy & Izod Tests
• Supplied with Incremental plates would be supplied which could be attached to these hammers to convert them in to hammers for 2nd, 3rd, 4th & 5th scale.
• Screw (Vise) type powder coated bench for Izod test and Sample holding stand for Charpy sample test as per standard.
• Paint: Powder Coated.
• Power:230 V AC, 1 Phase, 60 Hz. (OR AS PER REQUIREMENT)

Product Details:

A Universal Testing Machine (UTM) is a type of equipment used in material testing to determine the mechanical properties of materials, such as strength, toughness, hardness, elasticity, and plasticity. A computerized UTM is an advanced version of the traditional UTM that uses computer software to control the testing process and collect, analyze, and store the test data.
A computerized UTM typically consists of a loading frame, which applies the load to the specimen, and a control system, which controls the testing process and records the data. The control system can be operated through a user-friendly software interface, allowing the operator to select the test method, define the test parameters, and monitor the testing process in real-time.

Product Details:

Digital tensile testing machine is a device used to test the tensile strength, elongation, and other mechanical properties of materials such as metals, plastics, and composites. The digital model of the tensile testing machine incorporates digital technology to automate the testing process and provide more accurate and reliable results.
The digital tensile testing machine typically consists of a load cell, a gripping system, a crosshead, and a digital display. The load cell is used to apply a controlled force to the material being tested, while the gripping system holds the material in place. The crosshead moves at a constant speed, pulling the material until it reaches its breaking point. The digital display shows real-time test results, including force, displacement, and strain.
The digital model of a tensile testing machine automates the measurement and calculation process, providing more precise and repeatable results than manual testing methods. The digital display also allows for easier monitoring and control of the testing process.
The benefits of using a digital tensile testing machine include faster testing times, improved accuracy and repeatability, and the ability to store and analyze test data for quality control and process improvement purposes.
Specification

• Capacity: 1000 Kgf
• Load cell: ‘S Type’ load-cell of reputed make 
• Least count for load: 0.1 Kgf 
• Display: Digital LCD Display
• Result: Load & Elongation values 
• Least count for elongation: 0.1 mm 
• Speed Range: 40mm/min - 400 mm/min 
• Vertical Clearance: 800mm
• Type: Single Column Tensile Testing Machine
• Load units: Kgf
• Speed control: Dedicated AC Drive
• Motor : Crompton/ Bharat Bijlee make 1.5 hp induction motor with Gear Box and Drive
• Test jaws: Vice Type (By default) else Please specify your applications at the time of order. 
• Power Supply: 230 Volt AC, 50 Hz, Single Phase
• Paint: Powder Coated & Hard Chromed