PET And Preform Testing Instruments

Product Details:

A bottle cap torque tester is a device used to measure the torque required to open or close a bottle cap. It is commonly used in the packaging industry to test the quality and performance of bottle caps and closures.

The bottle cap torque tester typically consists of a clamping system to hold the bottle, a motorized drive to rotate the cap, and a torque sensor to measure the torque required to open or close the cap. The device may also include a digital display to show the test results.
The bottle cap torque tester can be used to ensure that the bottle caps and closures are properly sealed and have the appropriate torque resistance to prevent leaks and spills during transportation and handling. It can also be used to measure the consistency of the torque resistance of bottle caps from different production batches.

The benefits of using a bottle cap torque tester include improved quality control, increased efficiency, and reduced waste. By using a bottle cap torque tester, manufacturers and suppliers can identify and address issues with bottle caps and closures before they reach the market, reducing the risk of customer complaints and returns.

Product Details:

The Hot Wire Bottle Cutter is a device used to cut plastic bottles in a precise and controlled manner for the purpose of testing their physical properties. The device uses a heated wire to slice through the bottle material, allowing for a clean and accurate cut.
The Hot Wire Bottle Cutter typically consists of a frame with a cutting platform, a heated wire, and a control unit to regulate the temperature of the wire. To use the device, a plastic bottle is placed on the cutting platform and the wire is heated to a predetermined temperature. The wire is then guided through the bottle using a cutting template, which ensures a consistent and repeatable cut.
The device is commonly used in the packaging industry to test the physical properties of plastic bottles, such as their wall thickness, burst strength, and top-load resistance. By cutting a bottle in a precise and controlled manner, the Hot Wire Bottle Cutter allows for accurate measurements and analysis of these properties.

Product Details:

A Polariscope strain viewer is a device used to measure the strain in transparent materials such as plastics, glass, and other crystalline materials. It works by using polarized light to detect any birefringence or double refraction that occurs within the material due to stress or strain.
The polariscope strain viewer consists of two polarizing filters, one placed in front of the light source and the other placed in front of the eyepiece. When the light passes through the first polarizer, it becomes linearly polarized. As it passes through the sample, any stress or strain within the material causes the polarization direction to rotate, resulting in the second polarizer either blocking or allowing the light to pass through. This causes changes in the intensity and color of the light, which can be seen through the eyepiece.
The polariscope strain viewer is commonly used in the plastics industry to test the quality of plastic products, such as bottles and containers, as well as in the glass industry to test the quality of glass products. It can detect defects such as residual stress, strain, and internal stress within the material, allowing for the identification of potential weak points or areas of failure.

Product Details:

A secure seal tester is a device used to test the integrity of seals on packages, such as pouches, bags, and containers. It ensures that the seals are properly formed and capable of preventing any leakage or contamination of the product inside.
The secure seal tester works by applying pressure or vacuum to the package and measuring any changes in pressure or vacuum over time. If there is a drop in pressure or vacuum, it indicates that there is a leak in the seal.
There are different types of secure seal testers available, including manual, semi-automatic, and fully automatic. Manual testers require the operator to perform the test by hand, while semi-automatic testers automate some of the steps but still require manual intervention. Fully automatic testers can perform the test automatically without any human intervention.
Secure seal testers are commonly used in industries such as food and beverage, pharmaceuticals, and medical devices to ensure that their products are properly sealed and protected from external factors such as moisture, air, and bacteria.

Specificaiton-

• Measuring range: 0 to 12.00 bar
• Resolution: 0.5 bar
• Input Medium : Carbon Di Oxide / Compressed Air / Nitrogen
• Test on bottles & cans.
• Display: Analogue Gauge
• Units: bar/Psi
• Setting of the level of pressure (regulator)
• Setting maximum pressure: 12 bar

Product Details:

Top load tester is a device used to test the top load capacity of containers such as bottles, jars, and other types of packaging. The digital top load tester is an advanced version of the top load tester that uses digital technology to provide accurate and reliable test results.
The digital top load tester works by applying a load to the top of the container, which measures the force required to cause the container to deform or collapse. This force is then recorded and displayed digitally on the device, allowing for easy and precise measurement.
Digital top load testers are commonly used in industries such as food and beverage, pharmaceuticals, and cosmetics to ensure that the packaging used for their products meets the necessary standards and can withstand the rigors of transportation and storage.

Specificatoin:-

• Load Capacity: 0- 100 Kgf. 
• Used to measure buckling strength. 
• Compression Plates size: Ø200mm or as per requirement
• Speed: Variable (10mm/min to 50mm/min or as required) 
• Speed variation through Frequency drive make. 
• Microprocessor based LCD load indicator.
• Accuracy: ± 0.05% of load indicated. 
• Least Count: 10gm. 
• Peak load hold Indication. 
• Limit switches for protection of cross head travel 
• Operation for test from Machine with For, Rev and Stop switch on machine. 
• Results can be evaluated in Kgf. 
• Over load excess compression protection provided.
• Over Voltage protection. 
• Heavy duty frame structure 
• Table top Model. 
• Paint: Powder Coating. 
• Power: 220V AC, 50Hz.

Product Details:

A computerized top load tester is an advanced version of the top load tester that uses computer technology to provide more precise and efficient testing of the top load capacity of containers.
The computerized top load tester works by using a computer-controlled system to apply a load to the top of the container and measure the force required to deform or collapse the container. The testing parameters, such as load rate and hold time, can be programmed into the computer, ensuring consistent and repeatable testing results.
One of the main benefits of a computerized top load tester is its ability to perform multiple tests quickly and accurately, saving time and increasing productivity. The results of each test can be recorded and stored in a database, making it easy to track and analyze test data over time.

Specificatoin 

• Load Capacity: 0- 100 Kgf. 
• Used to measure buckling strength. 
• Compression Plates size: Diameter 150 mm or as per sample. 
• Speed: Variable (5 to 200 mm /min or as per required) 
• Speed variation through Frequency drive make. 
• Microprocessor based LCD load indicator: Accuracy of ± 0.05% of load indicated & Resolution of 0.1 kg. 
• Peak load hold Indication. 
• Auto stop at preset point of Load (Kgs) or compressive travel (mm). 
• Limit switches for protection of cross head travel 
• Operation for test from Machine with For, Rev and Stop switch on machine and also, from PC software. 
• Microprocessor based load indicator: Accuracy Of +/- 0.05% of load indicated. 
• Results can be evaluated in Kg, Newton & Pound. 
• Over load excess compression protection provided 
• Over Voltage protection. 
• Versatile software with Repeat test and comparison of test results, Average result display. 
• Excel sheet conversion of data and graph. 
• Auto selection of all values on graph with modification option. 
• Software Key and CD will be provided with machine. 
• RS 232 interface with WINDOW based software to conduct test and keep record of data with graph for the test and calculated results of Compressive Load and compression in mm 
• Heavy duty frame structure 
• Compression display: Least count of 0.1 mm through Proximity / encoder switch. 
• Table top Model. 
• Paint: Powder Coating. 
• Power: 220V AC, 50Hz.
• Computer/ Laptop: Client Scope.