Paper and Packaging Testing Instruments

Product Details:

Bursting Strength Tester is Quality Testing Equipment that is popularly used in the paper and packaging and textile industries. The equipment helps evaluate the Bursting Strength or Bursting Factor Value of a product to determine the capacity of resisting the vertical load before it burst out and damages itself. The tester comes with advanced features and deliverables which are designed as per international standards ensuring high precision in test results. Material like Paper, Cardboard, Foil, Fabric etc. used in packaging industries must be strong enough to prevent damage under load while in storage or during transportation. They also are responsible to protect the product packed inside. Hence, for Industries like paper & packaging, or textile, ensuring the bursting strength of the raw material is vital to ensure that the material is good enough to sustain through the storage and transit course. The higher the bursting strength, the more resistant is the material against vertical load.

Specification- 

• Pressure Range: 50 Kg/ cm2
• Least Count : 0.1 Kg/cm2
• Display: Digital
• Opening in upper clamp:  35.5 mm diameter 
• Openings in lower clamp:  38.1 mm diameter
• Rate of fluid displacement: 95 cc/minute
• Test fluid: Glycerin
• Motor: ¼ HP Single Phase
• Peak Hold Facility: Yes
• Accuracy: ± 1% within 10% to 90% of entire range as per IS: 1828
• Standards: ASTM D3786, ASTM D774
• Dimension:  61 x 44 x 44 cm

Product Details:

Box compression tester is a testing instrument used to measure the compression strength of corrugated cardboard boxes and other packaging materials. It is designed to provide accurate and reliable measurements of the amount of weight a box can withstand without collapsing or being deformed.

The box compression tester works by placing a sample box on the tester's platform and compressing it with a hydraulic or pneumatic cylinder. The tester measures the amount of force applied to the box and displays it on a digital display in pounds-force (lbf) or kilonewtons (kN).
The box compression tester is an important tool for the packaging industry, as it ensures that packaging materials meet the required standards for shipping and handling. By using the tester, manufacturers can determine the maximum amount of weight a box can carry without being damaged or collapsing, which can help prevent product loss and damage during transportation.

Product Details:

A drop tester is a device used to simulate the effects of impact and dropping on products or packages during shipping and handling. The drop tester typically consists of a platform for the product or package to be placed on, and a mechanism to drop the platform from a specified height onto a hard surface.
The drop tester is an important tool for manufacturers and suppliers to test the durability and impact resistance of their products and packaging. By subjecting their products to a simulated drop, they can identify any weaknesses or areas for improvement in their designs.
Drop testers are commonly used in the packaging industry, particularly for fragile or delicate items such as electronics, glassware, and ceramics. They are also used in the transportation industry to test the impact resistance of vehicle components and other equipment.
The results of drop tests can be used to inform packaging design, transportation methods, and handling procedures. They can also be used to determine the appropriate packaging materials and cushioning needed to protect products during shipping.
Specification

• Height: 1.5 meter
• Minimum Drop Height: 400mm 
• Maximum Drop Height: 1500mm
• Maximum sample Weight: 40 Kg
• Sample Mounting table: 650mm x 650 mm
• Uplift of Mounting Table: Motorized
• Adjustable angle holder is provided with the device.
• Standards: IS:7028 Pt IV
• Type of tests: 
• Straight Drop
• Angular Drop

Product Details:

Bursting strength tester pneumatic offered by Pacorr is one of the most precise testing instruments that is widely used for calculating the bursting strength of the materials and ensure better quality. The instrument is provided with serrated clamping mechanisms that allows tight and slippage free gripping of the specimen. The pressure required for clamping of specimen is applied pneumatically to ensure better and convenient gripping. The digital display shows accurate test reading for the convenience of the users. There is a circular diaphragm made from pure gum rubber provided with the instrument to apply pressure on the specimen during the testing procedure. The test is conducted by applying hydraulic pressure on the diaphragm using glycerine that stretches the diaphragm and causes the rupture of the specimen. When it comes to the quality and longevity of the instrument, the materials used for fabrication of the instrument are of highest grade and can withstand the extreme harsh conditions of the industries and hence can service for a longer time without compromising the accuracy and functionally of the instrument. The Bursting Strength Tester -Pneumatic –computerize comes with computer software that allows easy computer connectivity and allows users to download the testing data on a computer devices for better and in-depth analysis of the testing results.

Specification-

• Capacity:0-40Kg/cm2
• Least Count : 0.1Kg/cm2
• Display: Digital & Computerized both   
• Clamping arrangement: Pneumatic
• Compressed Air Pressure: 2-5Bar
• Opening in upper clamp: 35.5 mm diameter
• Openings in lower clamp: 38.1 mm diameter
• Rate of fluid displacement: 95cc/minute
• Test fluid: Glycerin
• Motor: ¼ HP Single Phase
• Peak Hold Facility: Yes
• Safety Switch: Yes
• RS232 port with software
• Accuracy: ± 1% within 10% to 90% of entire range as per IS:1828
• Standards: ASTM D3786, ASTMD774

Product Details:

An Edge Crush Tester (ECT), Ring Crush Tester (RCT), and Flat Crush Tester (FCT) are all types of devices used to measure the strength and performance of paper and cardboard.
The Edge Crush Tester (ECT) measures the ability of corrugated board to resist crushing at its edges, which is a critical factor in determining the overall strength of a box or container. The ECT test involves applying a load to the edge of the corrugated board until it collapses and measuring the force required to do so.
The Ring Crush Tester (RCT) measures the resistance of paper or board to a crushing force applied to its circular area, similar to the ECT test but applied to a smaller, circular area. The RCT test is often used to measure the strength of paper and board used in the manufacturing of cartons and boxes.
The Flat Crush Tester (FCT) measures the ability of paper and board to withstand a compressive force applied to its flat surface. The FCT test involves compressing a flat sample of paper or board between two plates and measuring the force required to achieve a certain level of deformation.

Specification

• Capacity: 250 Kgf  
• LCD Display with Backlit
• Measuring Unit: kgf
• Least count: 0.05 kgf 
• Accuracy: ± 1% 
• Test speed: 12.5 mm/min. 
• Speed Range: 10mm/min to 50mm/min.
• Platen Size:  150mm Diameter.(Upper & Lower)
• Fixtures for testing Ring Crush, Flat Crush & Edge Crush shall be provided. 
• Material of Construction: M.S Powder coated and Hard Chromed
• Mottor: 1hp, 3 phase (Crompton/ Bharat Bijlee make) with Gearbox
• Speed Drive: Crompton/ Delta make
• Power: 220 VAC, Single Phase, 50Hz
• Related Standards: IS 7063-2

Product Details:

Box compression tester with a screen is a device used to measure the compressive strength of corrugated boxes and containers with the added feature of displaying test results on a screen.
The box compression tester consists of a hydraulic ram, load cell, and a screen display. The hydraulic ram applies pressure to the box being tested, while the load cell measures the force applied. The screen display shows the real-time test results, including the maximum load, deformation, and compression strength of the box.
The benefits of using a box compression tester with a screen include easier and more convenient monitoring of the test process and results. The screen display also allows operators to quickly and easily identify any issues with the box being tested, such as deformation or failure.
Specificatoin

• Capacity: 2000Kgf
• Display: LCD Screen with software is mounted over the panel.
• Accuracy: ± 1% of FSD.
• Least Count: 100gm
• Test Platform Size : 1000mm x 1000mm x 1000mm
• Test Speed: 12.5 ± 2.5 mm/min
• Speed Drive: 10mm/min to 50mm/min. 
• Load Sensors: 4 Nos.
• Paint: Powder Coated & Hard Chrome
• Motor: Crompton/ Bharat Bijlee make 1.5 hp Induction Motor & Drive
• Power: 220V AC, Single phase, 50 Hz
• Standard: ASTM D642, ASTM D4169

Product Details:

Box compression tester is a device used to measure the compressive strength of corrugated boxes and containers. A computerized box compression tester uses advanced technology to automate the testing process and provide more accurate and reliable results.
The computerized box compression tester typically consists of a hydraulic ram, load cell, and a computer system. The hydraulic ram applies pressure to the box being tested, while the load cell measures the force applied. The computer system records the data and displays the results in real-time.
Computerized box compression testers can also perform a variety of tests, including edge crush resistance, flat crush resistance, and puncture resistance. These tests help to determine the overall strength and durability of a box or container.
The benefits of using a computerized box compression tester include faster testing times, improved accuracy and repeatability, and the ability to store and analyze test data for quality control and process improvement purposes.
Overall, a computerized box compression tester is an essential tool for manufacturers and suppliers who need to ensure the quality and performance of their corrugated boxes and containers.
Specification-

• Capacity: 1000Kgf
• Display: LCD (Digital) with Backlit
• Accuracy: ± 1% of FSD.
• Least Count: 100gm
• Test Platform Size : 600mm x 600mm
• Test Speed: 12.5 ± 2.5 mm/min
• Speed Drive: 10mm/min to 50mm/min. 
• RS232 Port to interface with PC.
• Paint: Powder Coated
• Motor: Crompton/ Bharat Bijlee make 1.5 hp Induction Motor & Drive
• Power: 220V AC, Single phase, 50 Hz
• Standard: ASTM D642, ASTM D4169

Product Details:

PACORR Double Column Tensile Testing Machine is a device used to measure the mechanical properties of materials such as tensile strength, yield strength, elongation, and modulus of elasticity. The machine consists of two columns with a crosshead that moves up and down between them. The specimen is placed between the two grips and subjected to a uniaxial tensile force until it breaks. The digital version of the machine has digital displays that show the test parameters and results.
The digital double column tensile testing machine typically consists of a load cell, a controller, and a computer. The load cell measures the force applied to the specimen, and the controller records the data and controls the test parameters. The computer displays the test results in real-time and stores them for later analysis.

Product Details: